Fenelon Station Gallery
  • Home
  • Gallery History
  • Artists
    • All Artists
    • Janice Addison
    • Marilyn Britt
    • Marilyn Clayton
    • Sandy Cogar
    • Lynn Cragg
    • Mary Firth
    • Linda Harris
    • Faye Jacobs
    • R. John Leggett
    • Janet McDougall
    • Sandi McNeil
    • Dagmar Pinney
    • Maud Skoog
    • Terry Sullivan
    • Janet Tysiak
    • Anne-Marie Van Brunt
    • Morris Young
  • Gallery Calendar
  • Application
  • News & Events
  • Location
    • Privacy Policy

Archive for woodturner

Year End Woodturning Competition – Fudgee

By Marys
 on June 14, 2013
 with no comments

If you have been following last year’s blog (April 4, 2012) my parting statement was about my completed work: “If my wife doesn’t abscond with it you will see it at one of my shows.” And that is how this story all began.

2013 Master's Award for Fruit

2013 Master’s Award for Fruit

Last fall I completed a two bowl set; 10” and 8”diameter dyed oak bowls. Barb promptly took the larger bowl, put it on the kitchen counter and declared that this was her new fruit bowl. Well I guess she does have spousal rights so my loss, her gain. The quest began looking for suitable replica fruit for the bowl with little success. Barb’s solution was for me to go down to the shop and make some fruit. I just happened to have a nice piece of spalted silver birch in my work shop…….. Who am I kidding……..? I have lots of weird pieces of wood in my shop, so I did manage to turn two apples and a pear. I was taken back on how elegant they looked and turned grapes, cherries and a variety of plums. Most of the wood is local but a few are exotic wood and nuts. Barb was quite pleased and we now have a bowl full of wooden fruit sitting in our kitchen which has become a conversational piece of artwork.

If you have read my bio you will note that I am an active member of the Kawartha Woodturning Guild. Each year I challenge myself to turn a piece of work for the Year End Woodturning Competition. As a Master Turner I am restricted to having only one submission and turning fruit would be considered spindle turning therefore putting them in a wooden bowl would not be allowed. I settled for a nicely sculpted glass shallow bowl. So I began selecting wood for my fruit bowl and as a result my submission consists of silver maple, spalted birch, hickory, butternut, hard maple, walnut, pine, padauk, purple heart and banksia nut. I used aniline pigment for one of the apples, cherries and red and green grapes. Tung oil was used on the remainder of the fruit to bring out the grain. On June 6th I was awarded first prize in the Master Turner’s submission. As for the fruit bowl, it can be viewed or purchased at My Favorite Things in Bobcaygeon.

So what can I say, Barb’s absconding with yet another one of my turned pieces stimulated my creative juices and challenged me (successfully) to try new things. Thanks Barb.

[nggallery id=28]

Morris will be sitting in the gallery next on July 4th.

In categories Artists Tagged with fudgee, Morris young, prize, woodturner with no comments

A day in the life of… Fudgee

By Marys
 on April 4, 2012
 with no comments

My business name is known as Woodturning by Fudgee which is a nickname I attained as a teen growing up in Toronto. I was a civil servant for 28 years and have been retired for the past two years. I hope this little blurb will give you some insight into who I am and what motivates and inspires me.

Wood selection

Morris looks for natural elements found in wood to make an interesting piece

To begin with most of my work is done before breakfast. I usually get up sometime between 5-6 am and head down to the workshop and depending on how challenged I’m feeling (or awake) will determine the morning project. I usually turn an item every day or two and the larger items may take a week. I turn logs, branches and blocks of wood to create decorative and functional works of art. Since my early teens I’ve had keen interest in creative expression. I’ve pursued interest in many mediums including leather and wood carving, drawing, painting, photography, woodworking and more recently wood turning.

 

Hollowing out the inside of the vase

Here Morris is hollowing out the inside of a vase

My first encounter with a lathe was in Junior High School where I completed a small dish and in 2001 I purchased my first lathe. Mainly through self instruction I learned the basics in wood turning and since I have become an active wood turner. In 2002 I joined the Kawartha Woodturners Guild and continue to be an active member. I have given demonstrations on how to turn and color wooden flowers to both the Toronto and Kawartha Woodturners Guilds. I generally have about two tons of locally obtained wood at any given time in and around our home in Rosedale which can take up to two years of drying to become suitable for creating works of art. The wood is usually obtained from downed trees around our home. Friends and acquaintances will drop off wood right at my door step.

When I look at wood, I look for natural elements found in wood (many would consider this wood for the burn pile). In fact, a lot of my pieces of wood have been retrieved from burn piles destined for someone’s fireplace or stove. Anyway, I look for features such as bark inclusions, unusual figure, distressed areas, spalting, natural edges, sapwood/heartwood and color/grain contrast. I turn each piece to accentuate the grain, texture and natural color, often leaving traces of bark and natural decay to enhance the beauty that nature has already created.

[nggallery id=18]

I use a number of wood turning chisels to carve each piece of work. Each piece of wood really dictates the end product. I may start wanting to have a specific profile but once I open the wood it makes me skew from my original plan……that’s the beauty of turning, you are never sure of the end result or what beauty lies within.

Once the carving has been completed, I start sanding, beginning at about 120 grit and finishing with 400/600 grit. My favourite finish is Tung oil which accentuates the grain. The next step, while the lathe is turning about 1200-1500 rpm (where permitted) is to apply a mixture of shellac and Tung oil. The friction is used to create a very hard finish. The end result is a one-of-a-kind decorative or functional piece of art.

If my wife doesn’t abscond with it you will see it at one of my shows. Speaking of shows, I will be attending the following shows and retail stores.

  • Earth to Art April 27-28 at the Lindsay Inn 345 Lindsay St. S Lindsay
  • Station Gallery of Fenelon Falls May 19-Oct 8 103 Lindsay St. Fenelon Falls
  • Valentia Arts Festival July 14 Valentia Church and Community Hall
  • Kawartha Art Festival Sept 1-2 Fenelon Fair Ground 27 Veterans Way
  • Victoria County Studio Tour Sept 29-30 and Oct 6-7
  • My Favourite Thing 10 King St E Bobcaygeon  Retail Store
  • Galaxy Picture Framing and Gifts 104 Kent St W. Lindsay ON Retail Store

 

In categories Artists Tagged with artist, Canada, fenelon, lathe, Morris young, ontario, woodturner with no comments

Follow Us:

  • Twitter
  • Facebook

Subscribe to our mailing list

* indicates required

Recent Posts

  • Making a glass bird with Mary Firth
  • Painting the Fenelon Falls Museum – Terry Sullivan
  • Making Frames – Terry Sullivan
  • Ingorance is bliss – Sandy Cogar
  • Marilyn Clayton and 8th MOC Designs

Categories

Fenelon Station Gallery
Copyright © 2023 All Rights Reserved

Designed by m. sullivan